Arduino MicroΒΆ
Arduino |
GPIB connector |
Function |
|---|---|---|
D3 |
1 |
DIO1 |
D15 |
2 |
DIO2 |
D16 |
3 |
DIO3 |
D14 |
4 |
DIO4 |
A0 |
5 |
EOI |
A1 |
6 |
DAV |
A2 |
7 |
NRFD |
A3 |
8 |
NDAC |
D4 |
9 |
IFC |
D7 |
10 |
SRQ |
D2 |
11 |
ATN |
GND |
12 |
Shield |
D8 |
13 |
DIO5 |
D9 |
14 |
DIO6 |
D10 |
15 |
DIO7 |
D6 |
16 |
DIO8 |
D5 |
17 |
REN |
GND |
18,19,20,21,22,23 |
GND |
The Micro is a very small form factor board that can be adapted to fit on the back of an IEEE488 connector. The design was contributed by Artag:
https://www.eevblog.com/forum/projects/ar488-arduino-based-gpib-adapter/msg2718346/#msg2718346
Adapter boards are available from: